diff --git a/core/resources/l10n/messages.properties b/core/resources/l10n/messages.properties
index fcf0b1298..daa918d2f 100644
--- a/core/resources/l10n/messages.properties
+++ b/core/resources/l10n/messages.properties
@@ -420,7 +420,7 @@ simedtdlg.border.Launchrod = Launch rod
simedtdlg.lbl.Length = Length:
simedtdlg.lbl.ttip.Length = The length of the launch rod.
simedtdlg.checkbox.Intowind = Always launch directly up-wind or down-wind
-simedtdlg.checkbox.ttip.Intowind1 = Checking this box makes the launch rod point into the wind.
+simedtdlg.checkbox.ttip.Intowind1 = Makes the launch rod point into the wind.
simedtdlg.checkbox.ttip.Intowind2 = A zero launchrod angle will point directly up.
simedtdlg.checkbox.ttip.Intowind3 = A negative launchrod angle will launch with the wind.
If you uncheck this box you can point the launchrod any direction you please.
simedtdlg.checkbox.ttip.Intowind4 = If you uncheck this box you can point the launchrod any direction you please.
@@ -789,7 +789,9 @@ custmatdlg.checkbox.Addmaterial = Add material to database
! Ring Component Config
ringcompcfg.OuterRadius = OuterRadius
ringcompcfg.Automatic = Automatic
+ringcompcfg.AutomaticOuter.ttip = Matches outer diameter to the inner diameter of the parent component.
ringcompcfg.InnerRadius = InnerRadius
+ringcompcfg.AutomaticInner.ttip = Matches inner diameter to the outer diameter of the child inner tube.
ringcompcfg.Thickness = Thickness
ringcompcfg.Length = Length
ringcompcfg.Positionrelativeto = Position relative to:
@@ -800,7 +802,7 @@ ringcompcfg.Distancefrom = Distance from the rocket centerline
ringcompcfg.Radialdirection = Radial direction:
ringcompcfg.radialdirectionfrom = The radial direction from the rocket centerline
ringcompcfg.but.Reset = Reset
-ringcompcfg.but.Resetcomponant = Reset the component to the rocket centerline
+ringcompcfg.but.Resetcomponant = Resets the component to the rocket centerline.
ringcompcfg.EngineBlock.desc = An engine block stops the motor from moving forwards in the motor mount tube.
In order to add a motor, create a body tube or inner tube and mark it as a motor mount in the Motor tab.
ringcompcfg.note.desc = Note: An inner tube will not affect the aerodynamics of the rocket even if it is located outside of the body tube.
@@ -815,10 +817,11 @@ BodyTubecfg.tab.Generalproperties = General properties
BodyTubecfg.tab.Motor = Motor
BodyTubecfg.tab.Motormountconf = Motor mount configuration
BodyTubecfg.checkbox.Automatic = Automatic
-BodyTubecfg.checkbox.ttip.Automatic = Use the diameter of the previous/next component
-BodyTubecfg.checkbox.ttip.Automatic_noReferenceComponent = There is no previous/next component to take the diameter of
-BodyTubecfg.checkbox.ttip.Automatic_alreadyAuto = The previous/next component already has its auto setting turned on
+BodyTubecfg.checkbox.ttip.Automatic = Uses the diameter of the previous/next component.
+BodyTubecfg.checkbox.ttip.Automatic_noReferenceComponent = There is no previous/next component to take the diameter of.
+BodyTubecfg.checkbox.ttip.Automatic_alreadyAuto = The previous/next component already has its auto setting turned on.
BodyTubecfg.checkbox.Filled = Filled
+BodyTubecfg.checkbox.Filled.ttip = Changes the body tube from a hollow tube to a solid rod.
! FinSetConfig
FinSetConfig.tab.Fintabs = Fin tabs
@@ -827,8 +830,9 @@ FinSetConfig.but.Converttofreeform = Convert to freeform
FinSetConfig.but.Converttofreeform.ttip = Convert this fin set into a freeform fin set
FinSetConfig.Convertfinset = Convert fin set
FinSetConfig.but.Splitfins = Split fins
-FinSetConfig.but.Splitfins.ttip = Split the fin set into separate fins
+FinSetConfig.but.Splitfins.ttip = Split the fin set into separate fins.
FinSetConfig.but.AutoCalc = Calculate automatically
+FinSetConfig.but.AutoCalc.ttip = Calculates the height and length of the fin tabs, based on
inner tube and centering ring components of the fin's parent component.
FinSetConfig.lbl.Through-the-wall = Through-the-wall fin tabs:
FinSetConfig.lbl.Tablength = Tab length:
FinSetConfig.ttip.Tablength = The length of the fin tab.
@@ -914,9 +918,13 @@ RocketCompCfg.but.Setforall = Set for all
RocketCompCfg.but.ttip.Setforall = Set this finish for all components of the rocket.
RocketCompCfg.lbl.Overridemassorcenter = Override the mass or center of gravity of the
RocketCompCfg.checkbox.Overridemass = Override mass:
+RocketCompCfg.checkbox.Overridemass.ttip = Overrides the mass of the component calculated by the component's volume and density.
RocketCompCfg.checkbox.Overridecenterofgrav = Override center of gravity:
+RocketCompCfg.checkbox.Overridecenterofgrav.ttip = Overrides the component's center of gravity location.
RocketCompCfg.checkbox.SetDragCoeff = Set coefficient of drag:
+RocketCompCfg.checkbox.SetDragCoeff.ttip = Overrides the component's coefficient of drag.
RocketCompCfg.checkbox.OverridemassandCG = Override mass and CG of all subcomponents
+RocketCompCfg.checkbox.OverridemassandCG.ttip = Overrides the aggregate mass and center of gravity (CG) of this component
and its subcomponents with the mass and CG of this component.
RocketCompCfg.lbl.longB1 = The overridden mass and center of gravity does not include motors.
RocketCompCfg.lbl.longB2 = The center of gravity is measured from the front end of the
RocketCompCfg.lbl.Commentsonthe = Comments on the
@@ -930,7 +938,7 @@ RocketCompCfg.lbl.Diameter = Diameter:
RocketCompCfg.lbl.Length = Length:
RocketCompCfg.lbl.Thickness = Thickness:
RocketCompCfg.checkbox.Endcapped = End capped
-RocketCompCfg.ttip.Endcapped = Whether the end of the shoulder is capped.
+RocketCompCfg.checkbox.Endcapped.ttip = Caps (closes) the end of the shoulder.
RocketCompCfg.title.Noseconeshoulder = Nose cone shoulder
RocketCompCfg.title.Aftshoulder = Aft shoulder
RocketCompCfg.border.Foreshoulder = Fore shoulder
@@ -1104,11 +1112,12 @@ NoseConeCfg.lbl.Shapeparam = Shape parameter:
NoseConeCfg.lbl.Noseconelength = Length:
NoseConeCfg.lbl.Basediam = Base diameter:
NoseConeCfg.checkbox.Automatic = Automatic
-NoseConeCfg.checkbox.ttip.Automatic = Use the diameter of the next component
-NoseConeCfg.checkbox.ttip.Automatic_noReferenceComponent = There is no next component to take the diameter of
-NoseConeCfg.checkbox.ttip.Automatic_alreadyAuto = The next component already has its auto setting turned on
+NoseConeCfg.checkbox.ttip.Automatic = Uses the diameter of the next component.
+NoseConeCfg.checkbox.ttip.Automatic_noReferenceComponent = There is no next component to take the diameter of.
+NoseConeCfg.checkbox.ttip.Automatic_alreadyAuto = The next component already has its auto setting turned on.
NoseConeCfg.lbl.Wallthickness = Wall thickness:
NoseConeCfg.checkbox.Filled = Filled
+NoseConeCfg.checkbox.Filled.ttip = Makes this component solid instead of hollow.
NoseConeCfg.tab.General = General
NoseConeCfg.tab.ttip.General = General properties
NoseConeCfg.tab.Shoulder = Shoulder
@@ -1134,6 +1143,8 @@ ParachuteCfg.lbl.Linelength = Line length:
ParachuteCfg.lbl.Material = Material:
ParachuteCfg.lbl.Posrelativeto = Position relative to:
ParachuteCfg.lbl.plus = plus
+ParachuteCfg.checkbox.AutomaticPacked = Automatic
+ParachuteCfg.checkbox.AutomaticPacked.ttip = Matches the packed diameter to the inside diameter of the parent component.
ParachuteCfg.lbl.Packedlength = Packed length:
ParachuteCfg.lbl.Packeddiam = Packed diameter:
ParachuteCfg.lbl.Deploysat = Deploys at:
@@ -1146,6 +1157,8 @@ ParachuteCfg.tab.ttip.Radialpos = Radial position configuration
ParachuteCfg.lbl.Radialdistance = Radial distance:
ParachuteCfg.lbl.Radialdirection = Radial direction:
ParachuteCfg.but.Reset = Reset
+ParachuteCfg.but.ResetCd.ttip = Resets the drag coefficient (CD) to a value of %.2f.
+ParachuteCfg.but.ResetRadial.ttip = Resets the component to the rocket centerline.
ParachuteCfg.lbl.plusdelay = plus
! ShockCordConfig
@@ -1186,7 +1199,8 @@ StreamerCfg.combo.ttip.MaterialModel = The component material affects the weight
StreamerCfg.lbl.longA1 = Drag coefficient CD:
StreamerCfg.lbl.longB1 = The drag coefficient relative to the total area of the streamer.
StreamerCfg.lbl.longB2 = A larger drag coefficient yields a slowed descent rate.
-StreamerCfg.lbl.Automatic = Automatic
+StreamerCfg.lbl.AutomaticCd = Automatic
+StreamerCfg.lbl.AutomaticCd.ttip = Calculate the streamer drag coefficient (CD) using its dimensions.
StreamerCfg.lbl.longC1 = The drag coefficient is relative to the area of the streamer.
StreamerCfg.lbl.Posrelativeto = Position relative to:
StreamerCfg.lbl.plus = plus
@@ -1215,16 +1229,18 @@ ThicknessRingCompCfg.tab.Generalprop = General properties
! TransitionConfig
TransitionCfg.lbl.Transitionshape = Transition shape:
TransitionCfg.checkbox.Clipped = Clipped
+TransitionCfg.checkbox.Clipped.ttip = Changes the transition end tangency point from rounded to sharp.
TransitionCfg.lbl.Shapeparam = Shape parameter:
TransitionCfg.lbl.Transitionlength = Length:
TransitionCfg.lbl.Forediam = Fore diameter:
TransitionCfg.checkbox.Automatic = Automatic
-TransitionCfg.checkbox.ttip.Automatic = Use the diameter of the previous/next component
-TransitionCfg.checkbox.ttip.Automatic_noReferenceComponent = There is no previous/next component to take the diameter of
-TransitionCfg.checkbox.ttip.Automatic_alreadyAuto = The previous/next component already has its auto setting turned on
+TransitionCfg.checkbox.ttip.Automatic = Uses the diameter of the previous/next component.
+TransitionCfg.checkbox.ttip.Automatic_noReferenceComponent = There is no previous/next component to take the diameter of.
+TransitionCfg.checkbox.ttip.Automatic_alreadyAuto = The previous/next component already has its auto setting turned on.
TransitionCfg.lbl.Aftdiam = Aft diameter:
TransitionCfg.lbl.Wallthickness = Wall thickness:
TransitionCfg.checkbox.Filled = Filled
+TransitionCfg.checkbox.Filled.ttip = Makes this component solid instead of hollow.
TransitionCfg.tab.General = General
TransitionCfg.tab.Generalproperties = General properties
TransitionCfg.tab.Shoulder = Shoulder
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/BodyTubeConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/BodyTubeConfig.java
index 39fbaa2ba..c2dc1d883 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/BodyTubeConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/BodyTubeConfig.java
@@ -103,6 +103,7 @@ public class BodyTubeConfig extends RocketComponentConfig {
//// Filled
JCheckBox check = new JCheckBox(new BooleanModel(component, "Filled"));
check.setText(trans.get("BodyTubecfg.checkbox.Filled"));
+ check.setToolTipText(trans.get("BodyTubecfg.checkbox.Filled.ttip"));
panel.add(check, "skip, span 2, wrap");
//// Material
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/FinSetConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/FinSetConfig.java
index ad1837219..480a0195a 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/FinSetConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/FinSetConfig.java
@@ -229,6 +229,7 @@ public abstract class FinSetConfig extends RocketComponentConfig {
// Calculate fin tab height, length, and position
autoCalc = new SelectColorButton(trans.get("FinSetConfig.but.AutoCalc"));
+ autoCalc.setToolTipText(trans.get("FinSetConfig.but.AutoCalc.ttip"));
autoCalc.addActionListener(new ActionListener() {
@Override
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/MassComponentConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/MassComponentConfig.java
index 23102e1f9..d5666cc73 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/MassComponentConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/MassComponentConfig.java
@@ -114,7 +114,8 @@ public class MassComponentConfig extends RocketComponentConfig {
////// Automatic
JCheckBox checkAutoPackedRadius = new JCheckBox(od.getAutomaticAction());
- checkAutoPackedRadius.setText(trans.get("TransitionCfg.checkbox.Automatic"));
+ checkAutoPackedRadius.setText(trans.get("ParachuteCfg.checkbox.AutomaticPacked"));
+ checkAutoPackedRadius.setToolTipText(trans.get("ParachuteCfg.checkbox.AutomaticPacked.ttip"));
panel.add(checkAutoPackedRadius, "skip, span 2, wrap");
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/NoseConeConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/NoseConeConfig.java
index 5f5881abc..18cd63fac 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/NoseConeConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/NoseConeConfig.java
@@ -131,7 +131,8 @@ public class NoseConeConfig extends RocketComponentConfig {
final JCheckBox filledCheckbox = new JCheckBox(new BooleanModel(component, "Filled"));
//// Filled
- filledCheckbox .setText(trans.get("NoseConeCfg.checkbox.Filled"));
+ filledCheckbox.setText(trans.get("NoseConeCfg.checkbox.Filled"));
+ filledCheckbox.setToolTipText(trans.get("NoseConeCfg.checkbox.Filled.ttip"));
panel.add(filledCheckbox, "skip, span 2, wrap");
}
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/ParachuteConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/ParachuteConfig.java
index 38fdffc3b..83cf1abe6 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/ParachuteConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/ParachuteConfig.java
@@ -103,6 +103,7 @@ public class ParachuteConfig extends RecoveryDeviceConfig {
//// Reset button
JButton button = new SelectColorButton(trans.get("ParachuteCfg.but.Reset"));
+ button.setToolTipText(String.format(trans.get("ParachuteCfg.but.ResetCd.ttip"), Parachute.DEFAULT_CD));
button.addActionListener(new ActionListener() {
@Override
public void actionPerformed(ActionEvent e) {
@@ -202,7 +203,8 @@ public class ParachuteConfig extends RecoveryDeviceConfig {
////// Automatic
JCheckBox checkAutoPackedRadius = new JCheckBox(od.getAutomaticAction());
- checkAutoPackedRadius.setText(trans.get("TransitionCfg.checkbox.Automatic"));
+ checkAutoPackedRadius.setText(trans.get("ParachuteCfg.checkbox.AutomaticPacked"));
+ checkAutoPackedRadius.setToolTipText(trans.get("ParachuteCfg.checkbox.AutomaticPacked.ttip"));
panel.add(checkAutoPackedRadius, "skip, span 2, wrap 5lp");
//// Deployment
@@ -300,6 +302,7 @@ public class ParachuteConfig extends RecoveryDeviceConfig {
//// Reset button
JButton button = new SelectColorButton(trans.get("ParachuteCfg.but.Reset"));
+ button.setToolTipText("ParachuteCfg.but.ResetRadial.ttip");
button.addActionListener(new ActionListener() {
@Override
public void actionPerformed(ActionEvent e) {
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/RingComponentConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/RingComponentConfig.java
index 27c2a4282..7e5837f9f 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/RingComponentConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/RingComponentConfig.java
@@ -60,6 +60,7 @@ public class RingComponentConfig extends RocketComponentConfig {
JCheckBox check = new JCheckBox(od.getAutomaticAction());
//// Automatic
check.setText(trans.get("ringcompcfg.Automatic"));
+ check.setToolTipText(trans.get("ringcompcfg.AutomaticOuter.ttip"));
panel.add(check, "skip, span 2, wrap");
}
}
@@ -87,6 +88,7 @@ public class RingComponentConfig extends RocketComponentConfig {
JCheckBox check = new JCheckBox(m.getAutomaticAction());
//// Automatic
check.setText(trans.get("ringcompcfg.Automatic"));
+ check.setToolTipText(trans.get("ringcompcfg.AutomaticInner.ttip"));
panel.add(check, "skip, span 2, wrap");
}
}
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/RocketComponentConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/RocketComponentConfig.java
index 57e7568d2..b9034ac91 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/RocketComponentConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/RocketComponentConfig.java
@@ -424,6 +424,7 @@ public class RocketComponentConfig extends JPanel {
check = new JCheckBox(bm);
//// Override mass:
check.setText(trans.get("RocketCompCfg.checkbox.Overridemass"));
+ check.setToolTipText(trans.get("RocketCompCfg.checkbox.Overridemass.ttip"));
panel.add(check, "growx 1, gapright 20lp");
DoubleModel m = new DoubleModel(component, "OverrideMass", UnitGroup.UNITS_MASS, 0);
@@ -449,6 +450,7 @@ public class RocketComponentConfig extends JPanel {
check = new JCheckBox(bm);
//// Override center of gravity:"
check.setText(trans.get("RocketCompCfg.checkbox.Overridecenterofgrav"));
+ check.setToolTipText(trans.get("RocketCompCfg.checkbox.Overridecenterofgrav.ttip"));
panel.add(check, "growx 1, gapright 20lp");
m = new DoubleModel(component, "OverrideCGX", UnitGroup.UNITS_LENGTH, 0);
@@ -504,6 +506,7 @@ public class RocketComponentConfig extends JPanel {
check = new JCheckBox(bm);
//// Override mass and CG of all subcomponents
check.setText(trans.get("RocketCompCfg.checkbox.OverridemassandCG"));
+ check.setToolTipText(trans.get("RocketCompCfg.checkbox.OverridemassandCG.ttip"));
panel.add(check, "spanx, wrap 35lp");
@@ -514,6 +517,7 @@ public class RocketComponentConfig extends JPanel {
check = new JCheckBox(bm);
//// Override coefficient of drag:
check.setText(trans.get("RocketCompCfg.checkbox.SetDragCoeff"));
+ check.setToolTipText(trans.get("RocketCompCfg.checkbox.SetDragCoeff.ttip"));
panel.add(check, "growx 1, gapright 20lp");
m = new DoubleModel(component, "OverrideCD", UnitGroup.UNITS_COEFFICIENT, 0);
@@ -629,8 +633,7 @@ public class RocketComponentConfig extends JPanel {
check = new JCheckBox(bm);
//// End capped
check.setText(trans.get("RocketCompCfg.checkbox.Endcapped"));
- //// Whether the end of the shoulder is capped.
- check.setToolTipText(trans.get("RocketCompCfg.ttip.Endcapped"));
+ check.setToolTipText(trans.get("RocketCompCfg.checkbox.Endcapped.ttip"));
sub.add(check, "spanx");
@@ -696,8 +699,7 @@ public class RocketComponentConfig extends JPanel {
check = new JCheckBox(bm);
//// End capped
check.setText(trans.get("RocketCompCfg.checkbox.Endcapped"));
- //// Whether the end of the shoulder is capped.
- check.setToolTipText(trans.get("RocketCompCfg.ttip.Endcapped"));
+ check.setToolTipText(trans.get("RocketCompCfg.checkbox.Endcapped.ttip"));
sub.add(check, "spanx");
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/ShockCordConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/ShockCordConfig.java
index a7a6e8a78..29f574c2a 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/ShockCordConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/ShockCordConfig.java
@@ -120,7 +120,8 @@ public class ShockCordConfig extends RocketComponentConfig {
////// Automatic
JCheckBox checkAutoPackedRadius = new JCheckBox(od.getAutomaticAction());
- checkAutoPackedRadius.setText(trans.get("TransitionCfg.checkbox.Automatic"));
+ checkAutoPackedRadius.setText(trans.get("ParachuteCfg.checkbox.AutomaticPacked"));
+ checkAutoPackedRadius.setToolTipText(trans.get("ParachuteCfg.checkbox.AutomaticPacked.ttip"));
panel2.add(checkAutoPackedRadius, "skip, span 2, wrap");
//// General and General properties
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/StreamerConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/StreamerConfig.java
index 504c6e712..b9b126c4d 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/StreamerConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/StreamerConfig.java
@@ -121,7 +121,8 @@ public class StreamerConfig extends RecoveryDeviceConfig {
JCheckBox check = new JCheckBox(m.getAutomaticAction());
//// Automatic
- check.setText(trans.get("StreamerCfg.lbl.Automatic"));
+ check.setText(trans.get("StreamerCfg.lbl.AutomaticCd"));
+ check.setToolTipText(trans.get("StreamerCfg.lbl.AutomaticCd.ttip"));
panel.add(check, "skip, span, wrap");
//// The drag coefficient is relative to the area of the streamer.
@@ -188,7 +189,8 @@ public class StreamerConfig extends RecoveryDeviceConfig {
////// Automatic
JCheckBox checkAutoPackedRadius = new JCheckBox(od.getAutomaticAction());
- checkAutoPackedRadius.setText(trans.get("TransitionCfg.checkbox.Automatic"));
+ checkAutoPackedRadius.setText(trans.get("ParachuteCfg.checkbox.AutomaticPacked"));
+ checkAutoPackedRadius.setToolTipText(trans.get("ParachuteCfg.checkbox.AutomaticPacked.ttip"));
panel.add(checkAutoPackedRadius, "skip, span 2, wrap 5lp");
diff --git a/swing/src/net/sf/openrocket/gui/configdialog/TransitionConfig.java b/swing/src/net/sf/openrocket/gui/configdialog/TransitionConfig.java
index 05975823b..b5b4c72cc 100644
--- a/swing/src/net/sf/openrocket/gui/configdialog/TransitionConfig.java
+++ b/swing/src/net/sf/openrocket/gui/configdialog/TransitionConfig.java
@@ -73,6 +73,7 @@ public class TransitionConfig extends RocketComponentConfig {
{//// Clipped
final JCheckBox checkbox = new JCheckBox(new BooleanModel(component, "Clipped"));
checkbox.setText(trans.get("TransitionCfg.checkbox.Clipped"));
+ checkbox.setToolTipText(trans.get("TransitionCfg.checkbox.Clipped.ttip"));
panel.add(checkbox, "wrap");
//// Shape parameter:
@@ -165,6 +166,7 @@ public class TransitionConfig extends RocketComponentConfig {
final JCheckBox thicknessCheckbox = new JCheckBox(new BooleanModel(component, "Filled"));
//// Filled
thicknessCheckbox.setText(trans.get("TransitionCfg.checkbox.Filled"));
+ thicknessCheckbox.setToolTipText(trans.get("TransitionCfg.checkbox.Filled.ttip"));
panel.add(thicknessCheckbox, "skip, span 2, wrap");
}