1185 lines
58 KiB
Plaintext
1185 lines
58 KiB
Plaintext
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
|
|
<!--
|
|
Quest parts file for OpenRocket
|
|
|
|
Copyright 2018 by Dave Cook NAR 21953 caveduck17@gmail.com
|
|
|
|
See the file LICENSE in this distribution for license information.
|
|
|
|
This file is for use with OpenRocket and provides parts definitions for Quest Aerospace products.
|
|
It is completely different from the original Quest.orc distributed with OpenRocket 15.03 and
|
|
has many improvements:
|
|
|
|
* Descriptions normalized to comma-separated list of attributes in increasing specificity
|
|
* Material types all matched to generic_materials.orc
|
|
* No materials listed that are not referenced in this file
|
|
* Dimension units are now those specified in reference materials such as catalogs
|
|
* No excess significant digits in dimensions
|
|
* Unspecified or missing dimensions estimated by photogrammetry of drawings and photos
|
|
* Mass overrides have been eliminated wherever feasible
|
|
* All discovered errors fixed or documented if unresolvable
|
|
|
|
Quest is notable for maintaining the old MPC metric tube system. The 2018 website only gives
|
|
dimensions for a few parts, but certain things are known from the MPC part system:
|
|
* The quoted tube sizes refer to the outside diameter
|
|
* Tube wall thickness is 0.50 mm for the smaller tubes
|
|
|
|
There is a little bit of units mayhem when dealing with Quest tube series. When Quest specifies
|
|
dimensions on their website, they are always in decimal inches, but the primary tube series
|
|
outside diameters are nearly all exact millimeter sizes, e.g. 5.0, 10.0, 15.0, etc. To keep
|
|
things readable I have used the metric tube diameters, but most lengths are in inches because
|
|
Quest specifies them that way and they are usually in round inch fractions.
|
|
|
|
Using this file:
|
|
Drop this file in the OS-dependent location where OpenRocket looks for component databases:
|
|
Windows: $APPDATA/OpenRocket/Components/ (you need to set $APPDATA)
|
|
OSX: $HOME/Library/Application Support/OpenRocket/Components/
|
|
Linux: $HOME/.openrocket/Components/
|
|
|
|
You need to restart OpenRocket after adding these files before the parts will be available.
|
|
|
|
DONE
|
|
====
|
|
Body tubes
|
|
Tube couplers
|
|
Engine blocks
|
|
Centering rings
|
|
Parachute and streamer
|
|
Nose cones (balsa)
|
|
Nose cones (plastic)
|
|
Transitions (plastic)
|
|
Launch lugs
|
|
|
|
TODO
|
|
====
|
|
none known
|
|
|
|
-->
|
|
<OpenRocketComponent>
|
|
<Version>0.1</Version>
|
|
<Materials>
|
|
|
|
<!-- Materials referenced in this file -->
|
|
|
|
<!-- Phenolic kraft used for tube couplers -->
|
|
<Material UnitsOfMeasure="g/cm3">
|
|
<Name>Phenolic, kraft, bulk</Name>
|
|
<Density>943.0</Density>
|
|
<Type>BULK</Type>
|
|
</Material>
|
|
|
|
<!-- Regular body tube -->
|
|
<Material UnitsOfMeasure="kg/m3">
|
|
<Name>Paper, spiral kraft glassine, Estes avg, bulk</Name>
|
|
<Density>894.4</Density>
|
|
<Type>BULK</Type>
|
|
</Material>
|
|
|
|
<!-- Regular balsa -->
|
|
<Material UnitsOfMeasure="g/cm3">
|
|
<Name>Balsa, bulk, 7 lb/ft3</Name>
|
|
<Density>112.0</Density>
|
|
<Type>BULK</Type>
|
|
</Material>
|
|
|
|
<!-- injection molded plastic parts -->
|
|
<Material UnitsOfMeasure="g/cm3">
|
|
<Name>Polystyrene, cast, bulk</Name>
|
|
<Density>1050.0</Density>
|
|
<Type>BULK</Type>
|
|
</Material>
|
|
|
|
<!-- clear payload tubes -->
|
|
<Material UnitsOfMeasure="g/cm3">
|
|
<Name>Mylar, bulk</Name>
|
|
<Density>1390.0</Density>
|
|
<Type>BULK</Type>
|
|
</Material>
|
|
|
|
<!-- lower density fiber for thrust rings etc. -->
|
|
<Material UnitsOfMeasure="g/cm3">
|
|
<Name>Fiber, bulk</Name>
|
|
<Density>657.0</Density>
|
|
<Type>BULK</Type>
|
|
</Material>
|
|
|
|
<!-- recent quest parachute measured at 1.1 mil, with printing -->
|
|
<Material UnitsOfMeasure="kg/m2">
|
|
<Name>Polyethylene film, HDPE, 1.0 mil, bare</Name>
|
|
<Density>0.0235</Density>
|
|
<Type>SURFACE</Type>
|
|
</Material>
|
|
|
|
<!-- Streamer material, 2 mil polyethylene -->
|
|
<Material UnitsOfMeasure="kg/m2">
|
|
<Name>Polyethylene film, HDPE, 2.0 mil, bare</Name>
|
|
<Density>0.0470</Density>
|
|
<Type>SURFACE</Type>
|
|
</Material>
|
|
|
|
<!-- Shroud line material - carpet thread -->
|
|
<Material UnitsOfMeasure="kg/m">
|
|
<Name>Carpet Thread</Name>
|
|
<Density>3.3E-4</Density>
|
|
<Type>LINE</Type>
|
|
</Material>
|
|
|
|
</Materials>
|
|
|
|
<Components>
|
|
|
|
<!-- ============= -->
|
|
<!-- Tube Couplers -->
|
|
<!-- ============= -->
|
|
<!-- Quest does not offer tube couplers smaller than 25mm on the 2009 nor 2018 websites.
|
|
On the 2009 website the 25mm paper tube coupler is described as "fishpaper", which would
|
|
be the same dark blue vulcanized paper tube used by Estes and others. The 35mm paper
|
|
coupler is "Kraft paper". The photos were not archived on the wayback machine so
|
|
I can't tell if these are the same or different materials.
|
|
|
|
No couplers nor transitions had PNs on the 2009 Quest website.
|
|
|
|
The original OR file had things seriously wrong for couplers with incorrect ODs, IDs and
|
|
bogus mass overrides, some based on very low fidelity weights listed by Quest.
|
|
We don't have good data on coupler thickness yet; until we know
|
|
better I am adopting an 0.50 mm wall thickness, same as the body tubes.
|
|
OR original file omitted the 30mm plastic coupler. -->
|
|
|
|
<!-- Q10100 25mm paper tube coupler is quoted on 2018 website as 1.6875" long, which is 1 11/16" -->
|
|
<!-- *** original OR file had incorrect ID/OD (OD was 25mm, should be 24) and mass override of 28 grams -->
|
|
<TubeCoupler>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10100</PartNumber>
|
|
<Description>Tube coupler, paper, 25mm, 1.6875", PN Q10100</Description>
|
|
<Material Type="BULK">Phenolic, kraft, bulk</Material>
|
|
<InsideDiameter Unit="mm">23.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">24.0</OutsideDiameter>
|
|
<Length Unit="in">1.6875</Length>
|
|
</TubeCoupler>
|
|
|
|
<!-- Q21085 plastic 30mm tube coupler is quoted as 2" long. It has a short central section and
|
|
molded in launch lug like its 35mm big brother. -->
|
|
<TubeCoupler>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q21085</PartNumber>
|
|
<Description>Tube coupler, plastic, 30mm, 2", PN Q21085</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<InsideDiameter Unit="mm">27.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">29.0</OutsideDiameter>
|
|
<Length Unit="in">2.0</Length>
|
|
</TubeCoupler>
|
|
|
|
<!-- Q10104 35mm paper coupler had bogus mass override of 28 grams -->
|
|
<TubeCoupler>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10104</PartNumber>
|
|
<Description>Tube coupler, paper, 35mm, 2.5", PN Q10104</Description>
|
|
<Material Type="BULK">Phenolic, kraft, bulk</Material>
|
|
<InsideDiameter Unit="mm">33.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">34.0</OutsideDiameter>
|
|
<Length Unit="in">2.5</Length>
|
|
</TubeCoupler>
|
|
|
|
<!-- Q21086 35mm plastic tube coupler is 2.125" long; has 0.125" center section and molded in launch lug.
|
|
Quest website says it's injection molded. Wall thickness and mass unknown;
|
|
assuming polystyrene material. Ignoring the center section here
|
|
since OpenRocket cannot model that, and it's very small. Original OR file had a
|
|
PN of 3535 and an ID of 30.9 mm, but it's hard to see the wall being 1.55mm -->
|
|
<TubeCoupler>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q21086, 3535</PartNumber>
|
|
<Description>Tube coupler, plastic, 35mm, 2.125", PN Q21086</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<InsideDiameter Unit="mm">32.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">34.0</OutsideDiameter>
|
|
<Length Unit="in">2.125</Length>
|
|
</TubeCoupler>
|
|
|
|
|
|
<!-- ========== -->
|
|
<!-- Body Tubes -->
|
|
<!-- ========== -->
|
|
|
|
<!-- MMX minimum diameter tube no longer exists on Quest website as of Jan 2021 -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q9527</PartNumber>
|
|
<Description>Body tube, paper, 7mm, white, 6", PN Q9527</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="mm">6.5</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">7.0</OutsideDiameter>
|
|
<Length Unit="in">6.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- MMX motor tube has specs OD 0.276, ID 0.252, len 1.0". I've kept them metric for
|
|
consistency. -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10311</PartNumber>
|
|
<Description>Body tube, paper, 7mm, white, MMX engine tube, 1.0", PN Q10311</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="mm">6.4</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">7.0</OutsideDiameter>
|
|
<Length Unit="in">1.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- MMX 10mm tube 6" long
|
|
Dimensions on 2021 website given as ID 0.372", OD 0.392", 6.0" long -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q9528</PartNumber>
|
|
<Description>Body tube, paper, 10mm, white, 6", PN Q9528</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.372</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.392</OutsideDiameter>
|
|
<Length Unit="in">6.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 15mm body tube 30" long
|
|
As of Jan 2021 website, dimensions are given as ID 0.550", OD 0.590", 30.0" length-->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T153000</PartNumber>
|
|
<Description>Body tube, paper, 15mm, white, 30"</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.550</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.590</OutsideDiameter>
|
|
<Length Unit="in">30.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 18mm motor mount tube is a slip fit inside a 20mm body tube.
|
|
Specs on 2021 website are ID 0.712", OD 0.738", length 2.6875"; using these as authoritative.
|
|
Had no PN on 2009 website.
|
|
I have an actual instance of this tube from a recent (2016?) Striker AGM kit. It is
|
|
yellow and very flimsy. I get a wall thickness of 0.32 mm but it is hard to measure
|
|
accurately as the tube is very soft and compressible. Outside diameter over an engine block as
|
|
support is 18.65mm. Measured length is 2.687". Wall .032 mm would give an ID of 18.01 mm.
|
|
This is close enough to the factory specs to stick with those. -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10303</PartNumber>
|
|
<Description>Body tube, paper, 18mm, yellow, 2.6875", motor mount, PN Q10303</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.712</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.738</OutsideDiameter>
|
|
<Length Unit="in">2.6875</Length>
|
|
</BodyTube>
|
|
|
|
<!-- Legacy listing of 20mm tube in 30" length with old style PN -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T203000</PartNumber>
|
|
<Description>Body tube, paper, 20mm, white, 30", PN T203000</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="mm">19.1</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">20.0</OutsideDiameter>
|
|
<Length Unit="in">30.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- On 2021 Quest website there is a new 12" long 20mm tube in yellow with
|
|
dimensions specified as ID 0.752", OD 0.788" -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q11210</PartNumber>
|
|
<Description>Body tube, paper, 20mm, yellow, 12", PN Q11210</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.752</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.788</OutsideDiameter>
|
|
<Length Unit="in">12.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- On 2018 Quest website the only 20mm tube was listed as 11" long in white
|
|
As of Jan 2021 dimensions are specified as ID 0.752", OD 0.788" -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q11214</PartNumber>
|
|
<Description>Body tube, paper, 20mm, white, 11", PN Q11214</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.752</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.788</OutsideDiameter>
|
|
<Length Unit="in">11.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 21mm motor mount tube for the old Quest D5-0 motor is still on 2021 website. In the photo, it's red.
|
|
Dimensions are now given as ID 0.795", OD 0.835" -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10315</PartNumber>
|
|
<Description>Body tube, paper, 21mm, red, D5 Motor Mount Tube, 3.65", PN Q10315</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.795</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.835</OutsideDiameter>
|
|
<Length Unit="in">3.65</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 24mm motor mount aka "adapter" tube is on 2018-2021+ website, length 2.75", size given only as 1".
|
|
ID/OD offset from 25mm tube with same offsets as 18mm motor tube, for which dimensions are given. -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q11300</PartNumber>
|
|
<Description>Body tube, paper, 24mm, white, 24mm MMT, 2.75", PN Q11300</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="mm">23.25</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">23.9</OutsideDiameter>
|
|
<Length Unit="in">2.75</Length>
|
|
</BodyTube>
|
|
|
|
<!-- Clear 25mm x 4" payload tube exists on 2018+ website
|
|
Dimensions are confusingly given as "PETG-CLEAR - cut in 4" lengths7/8" x 4" med. wall tube"
|
|
This does confirm that the clear tube is PETG -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q28700</PartNumber>
|
|
<Description>Body tube, plastic, 25mm, clear, 4.0"</Description>
|
|
<Material Type="BULK">Mylar, bulk</Material>
|
|
<InsideDiameter Unit="mm">24.0</InsideDiameter>
|
|
<OutsideDiameter Unit="m">25.0</OutsideDiameter>
|
|
<Length Unit="in">4.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 25mm clear red tint payload tube no longer appears on + website.
|
|
On the 2009 website is had no PN and was just called "Red Tint Payload Tube"
|
|
The 25mm payload tube is shown as clear in 2018 -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>25mm_red_tint_payload_tube</PartNumber>
|
|
<Description>Body tube, plastic, 25mm, red tint, 4.0"</Description>
|
|
<Material Type="BULK">Mylar, bulk</Material>
|
|
<InsideDiameter Unit="mm">24.0</InsideDiameter>
|
|
<OutsideDiameter Unit="m">25.0</OutsideDiameter>
|
|
<Length Unit="in">4.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 25mm x 30" paper tube has old style PN in original OR file
|
|
As of Jan 2021 website, dimensions are given as ID 0.950", OD 0.976", len 30" -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T253000, Q9522</PartNumber>
|
|
<Description>Body tube, paper, 25mm, white, 30", PN T253000/Q9522</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.950</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.976</OutsideDiameter>
|
|
<Length Unit="in">30.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 29mm MMT has heavier wall, dimensions given in inch units on 2018+ website -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10316</PartNumber>
|
|
<Description>Body tube, paper, 29mm, white, 29mm MMT, 4.5", PN Q10316</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">1.14</InsideDiameter>
|
|
<OutsideDiameter Unit="in">1.215</OutsideDiameter>
|
|
<Length Unit="in">4.5</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 30mm x 30" tube has old style PN in original OR file, 30" length no longer on website -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T303000, Q9523</PartNumber>
|
|
<Description>Body tube, paper, 30mm, white, 30", PN T303000/Q9523</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="mm">29.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">30.0</OutsideDiameter>
|
|
<Length Unit="in">30.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 30mm x 5" tube is on 2018+ website, specified only as "Body Tube 5" 30mm(white)" -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T303000, Q9523</PartNumber>
|
|
<Description>Body tube, paper, 30mm, white, 5", PN Q11421</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="mm">29.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">30.0</OutsideDiameter>
|
|
<Length Unit="in">5.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 35mm x 30" tube no longer exists on 2018 website -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T353000</PartNumber>
|
|
<Description>Body tube, paper, 35mm, white, 30", PN T353000</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="mm">34.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">35.0</OutsideDiameter>
|
|
<Length Unit="in">30.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 35mm x 18" tube only exists on 2018+ website. A sample acquired in 2018 has OD of 34.93 mm
|
|
and ID of 34.01 mm. Dimensions now specified in inch units as ID 1.340, OD 1.380, 18 long -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q11503</PartNumber>
|
|
<Description>Body tube, paper, 35mm, white, 18", PN Q11503</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">1.340</InsideDiameter>
|
|
<OutsideDiameter Unit="in">1.380</OutsideDiameter>
|
|
<Length Unit="in">18.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 40mm x 30" tube
|
|
On 2018+ website, dimensions are only given as 40mm diam, 30 inches long -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T403000, Q9525</PartNumber>
|
|
<Description>Body tube, paper, 40mm, white, 30", PN T403000/Q9525</Description>
|
|
<Material Type="BULK">Paper</Material>
|
|
<InsideDiameter Unit="mm">39.0</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">40.0</OutsideDiameter>
|
|
<Length Unit="in">30.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 40mm 18" tube is only on the 2018+ website, not on 2009 site
|
|
Dimensions now specified as ID 1.530", OD 1.570", 18" long -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q11511</PartNumber>
|
|
<Description>Body tube, paper, 40mm, white, 18", PN Q11511</Description>
|
|
<Material Type="BULK">Paper</Material>
|
|
<InsideDiameter Unit="in">1.530</InsideDiameter>
|
|
<OutsideDiameter Unit="in">1.570</OutsideDiameter>
|
|
<Length Unit="in">18.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 50mm x 24" has dimensions specified on 2009 and 2018+ websites
|
|
Dimensions now specified as ID 1.921", OD 1.970" -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>T502400, Q11700</PartNumber>
|
|
<Description>Body tube, paper, 50mm, white, 24", PN T502400/Q11700</Description>
|
|
<Material Type="BULK">Paper</Material>
|
|
<InsideDiameter Unit="in">1.921</InsideDiameter>
|
|
<OutsideDiameter Unit="in">1.970</OutsideDiameter>
|
|
<Length Unit="in">24.0</Length>
|
|
</BodyTube>
|
|
|
|
<!-- 50mm x 18" tube is on 2018+ website, but not on 2009 website
|
|
Dimensions now specified as ID 1.92", OD 1.97" -->
|
|
<BodyTube>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q11701</PartNumber>
|
|
<Description>Body tube, paper, 50mm, white, 18", PN Q11701</Description>
|
|
<Material Type="BULK">Paper</Material>
|
|
<InsideDiameter Unit="in">1.92</InsideDiameter>
|
|
<OutsideDiameter Unit="in">1.97</OutsideDiameter>
|
|
<Length Unit="in">18.0</Length>
|
|
</BodyTube>
|
|
|
|
|
|
<!-- ============= -->
|
|
<!-- Engine Blocks -->
|
|
<!-- ============= -->
|
|
|
|
<!-- MicroMaxx thrust ring -->
|
|
<EngineBlock>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q14005</PartNumber>
|
|
<Description>Engine block, fiber, 7mm, 0.25" len, Micromaxx, PN Q14005</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">3.75</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">6.3</OutsideDiameter>
|
|
<Length Unit="in">0.25</Length>
|
|
</EngineBlock>
|
|
|
|
<!-- 18mm thrust ring. Dimensions are specified on 2018 website. However a recent sample
|
|
from the 2016-2081 timeframe has ID of 13.6mm and OD of 18.0 mm. I'm going with the
|
|
measured ID here since it's 0.6mm different than spec. -->
|
|
<EngineBlock>
|
|
<Manufacturer>Quest Aerospace</Manufacturer>
|
|
<PartNumber>Q14000</PartNumber>
|
|
<Description>Engine block, fiber, 18mm, 0.25" len, PN Q14000</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">13.6</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">18.0</OutsideDiameter>
|
|
<Length Unit="in">0.25</Length>
|
|
</EngineBlock>
|
|
|
|
<!-- 20mm thrust ring for old D5 motors. Still on 2018 website, dimensions not given. -->
|
|
<EngineBlock>
|
|
<Manufacturer>Quest Aerospace</Manufacturer>
|
|
<PartNumber>Q14101</PartNumber>
|
|
<Description>Engine block, fiber, 20mm, 0.25" len, old D5 motor, PN Q14101</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">13.8</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">20.2</OutsideDiameter>
|
|
<Length Unit="in">0.25</Length>
|
|
</EngineBlock>
|
|
|
|
<!-- 29mm thrust ring. Original OR file had OD only microns larger than ID. Dimensions are given
|
|
on the 2018 Quest website. -->
|
|
<EngineBlock>
|
|
<Manufacturer>Quest Aerospace</Manufacturer>
|
|
<PartNumber>Q14103</PartNumber>
|
|
<Description>Engine block, fiber, 29mm, 0.25" len, PN Q14103</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">22.9</InsideDiameter>
|
|
<OutsideDiameter Unit="m">28.9</OutsideDiameter>
|
|
<Length Unit="in">0.25</Length>
|
|
</EngineBlock>
|
|
|
|
|
|
<!-- =============== -->
|
|
<!-- Centering Rings -->
|
|
<!-- =============== -->
|
|
|
|
<!-- thickness of thin fiber centering rings mostly not specified by Quest, but a couple
|
|
of them are so we use those values to fill in the blanks.
|
|
The 2009 website has very inconsistent PNs for the centering rings.
|
|
-->
|
|
|
|
<!-- 7mm Micromaxx MMT to 10mm -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q14007</PartNumber>
|
|
<Description>Centering ring, fiber, 7mm to 10mm MMX, 0.5", PN Q14007</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">7.06</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">9.34</OutsideDiameter>
|
|
<Length Unit="in">0.5</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 21mm D5 MMT to 25mm -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR2125, Q16036</PartNumber>
|
|
<Description>Centering ring, fiber, 21mm D5 MMT to 25mm, 0.045", PN Q16036</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">21.45</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">23.9</OutsideDiameter>
|
|
<Length Unit="in">0.045</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 21mm D5 MMT to 30mm -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR2130, Q16037</PartNumber>
|
|
<Description>Centering ring, fiber, 21mm D5 MMT to 30mm, 0.045", PN Q16037</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">21.45</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">28.75</OutsideDiameter>
|
|
<Length Unit="in">0.045</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 21mm D5 MMT to 35mm -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR2135, Q16038</PartNumber>
|
|
<Description>Centering ring, fiber, 21mm D5 MMT to 35mm, 0.045", PN Q16038</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">21.45</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">33.75</OutsideDiameter>
|
|
<Length Unit="in">0.045</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 21mm D5 MMT to 40mm -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR2140, Q16039</PartNumber>
|
|
<Description>Centering ring, fiber, 21mm D5 MMT to 40mm, 0.045", PN Q16039</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">21.45</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">38.75</OutsideDiameter>
|
|
<Length Unit="in">0.045</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 21mm D5 MMT to 50mm, 0.07" thick (per old OpenRocket file) -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR2150, Q16040</PartNumber>
|
|
<Description>Centering ring, fiber, 21mm D5 MMT to 50mm, 0.07", PN Q16040</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">21.45</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">48.75</OutsideDiameter>
|
|
<Length Unit="in">0.07</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 18mm MMT to 25mm, specs given on 2018 website as ID .752", OD .942", len 0.25".
|
|
Old PN CR24 confirmed -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR24, Q14050</PartNumber>
|
|
<Description>Centering ring, fiber, 18mm MMT to 25mm, 0.25", PN Q14050</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">19.1</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">23.9</OutsideDiameter>
|
|
<Length Unit="in">0.25</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 18mm MMT to 30mm. Old PN CR29 confirmed. -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR29, Q16001</PartNumber>
|
|
<Description>Centering ring, fiber, 18mm MMT to 30mm, 0.045", PN Q16001</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">19.1</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">28.75</OutsideDiameter>
|
|
<Length Unit="in">0.045</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 18mm MMT to 35mm, thickness specified on 2018 website as 0.045". Old PN CR34 confirmed. -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR34, Q16002</PartNumber>
|
|
<Description>Centering ring, fiber, 18mm MMT to 35mm, 0.045", PN Q16002</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">19.1</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">33.75</OutsideDiameter>
|
|
<Length Unit="in">0.045</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 18mm MMT to 40mm, thickness specified on 2018 website as 0.045". Old PN CF39 confirmed. -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR39, Q16007</PartNumber>
|
|
<Description>Centering ring, fiber, 18mm MMT to 40mm, 0.045", PN Q16007</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">19.1</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">38.75</OutsideDiameter>
|
|
<Length Unit="in">0.045</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 25mm to 30 mm, 0.5" long, dimensions given on 2018 website as ID .994", OD 1.134", 0.5" long.
|
|
Old PN looks backwards, doesn't exist on 2009 website, need to check a later version. -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR2924, Q14022</PartNumber>
|
|
<Description>Centering ring, fiber, 25mm to 30mm, 0.5", PN Q14022</Description>
|
|
<Material Type="BULK">Paper</Material>
|
|
<InsideDiameter Unit="mm">28.8</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">25.25</OutsideDiameter>
|
|
<Length Unit="in">0.50</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 25mm to 35mm ring is specified as .050" thick on 2009 and 2018 websites (inconsistent with others).
|
|
Old PN CR2534 confirmed. -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR2534, Q16008</PartNumber>
|
|
<Description>Centering ring, fiber, 25mm to 35mm, .05", PN Q16008</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">25.25</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">33.75</OutsideDiameter>
|
|
<Length Unit="in">0.05</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 25mm to 40mm - no such animal. -->
|
|
|
|
<!-- 25mm to 50mm. Old PN not confirmed, does not exist on 2009 website. -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR4924, Q16035</PartNumber>
|
|
<Description>Centering ring, fiber, 25mm to 50mm, 0.07"</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">25.1</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">48.70</OutsideDiameter>
|
|
<Length Unit="in">0.07</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- 29mm MMT to 50mm. Old PN not confirmed, not on 2009 website. Thickness 0.070 specified on 2018 site. -->
|
|
<CenteringRing>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>CR4929, Q16035</PartNumber>
|
|
<Description>Centering ring, fiber, 25mm to 50mm, 0.07"</Description>
|
|
<Material Type="BULK">Fiber, bulk</Material>
|
|
<InsideDiameter Unit="mm">28.9</InsideDiameter>
|
|
<OutsideDiameter Unit="mm">48.7</OutsideDiameter>
|
|
<Length Unit="in">0.07</Length>
|
|
</CenteringRing>
|
|
|
|
<!-- ========== -->
|
|
<!-- Nose Cones -->
|
|
<!-- ========== -->
|
|
|
|
<!-- Balsa nose cones -->
|
|
|
|
<!-- 10mm Micromaxx nose cone is the only balsa nose cone. Old PN unconfirmed. -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>19990</PartNumber>
|
|
<Description>Nose cone, balsa, 10mm, ogive, 1.0"</Description>
|
|
<Material Type="BULK">Balsa, bulk, 7 lb/ft3</Material>
|
|
<Filled>true</Filled>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">10.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">9.3</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.375</ShoulderLength>
|
|
<Length Unit="in">1.0</Length>
|
|
</NoseCone>
|
|
|
|
<!-- Plastic nose cones -->
|
|
<!-- Original OR file has thickness of all the PNCs at 3.175mm, way too high.
|
|
All had mass overrides, data source unknown but the masses look reasonable.
|
|
Thicknesses set to match a sample of PNC35Nike that I have. -->
|
|
|
|
<!-- 15mm plastic nose, no base. Original OR file had mass override 2.3 gm -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC15, Q20050</PartNumber>
|
|
<Description>Nose cone, plastic, 15mm, white, ogive, 1.0", PN PNC15/Q20050</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">2.3</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">15.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">13.9</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.25</ShoulderLength>
|
|
<Length Unit="in">1.0</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC20 is black blowmolded 1-piece. OR mass override was 2.8 gm -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC20, Q20075</PartNumber>
|
|
<Description>Nose cone, plastic, 20mm, black, ogive, 2.5", PN PNC20/Q20075</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">2.8</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">20.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">19.0</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.5</ShoulderLength>
|
|
<Length Unit="in">2.5</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC25 exists on the 2009 site, but there is no 25mm nose cone on the 2018 website.
|
|
OR file had mass override 7.1 gm and listed as 1-piece blowmold 3.125" long.
|
|
No info on shoulder length. -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC25</PartNumber>
|
|
<Description>Nose cone, plastic, 25mm, ogive, 3.125", PN PNC25</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">7.1</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">25.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">23.9</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.5</ShoulderLength>
|
|
<Length Unit="in">3.125</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC30 is listed on 2009 site as a 3.25" ogive without base. Original OR file
|
|
has mass override of 14.2 gm, and 0.75" shoulder length, both unsubstantiated. -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC30, Q20304</PartNumber>
|
|
<Description>Nose cone, plastic, 30mm, black, ogive, 3.25", PN PNC30/Q20304</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">14.2</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">30.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="m">28.9</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.75</ShoulderLength>
|
|
<Length Unit="in">3.25</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC35 is listed on 2009 site as 4.25" one piece blowmolded ogive; OR file has mass 10.2 gm and
|
|
shoulder length 0.75" -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC35, Q20200</PartNumber>
|
|
<Description>Nose cone, plastic, 35mm, white, ogive, 4.25", PN PNC35/Q20200</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">10.2</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">35.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">33.9</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.75</ShoulderLength>
|
|
<Length Unit="in">4.25</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC35B2 is 4.5" white blowmolded X-15 nose cone, white in 2018 site. OR file has mass 12.2 gm
|
|
and shoulder length 0.75". Might be able to pull real shoulder length from 2018 site photo. -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC35B2, Q20222</PartNumber>
|
|
<Description>Nose cone, plastic, 35mm, white, X-15 shape, 4.5", PN PNC35B2/Q20222</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">12.2</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">35.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">33.9</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.75</ShoulderLength>
|
|
<Length Unit="in">4.5</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC35Nike is an 8.0" 2-piece clamshell white injection molded cone with separate tip. Length given as
|
|
8" on 2009 site. OR file has mass 25.5 gm, shoulder length 0.75".
|
|
I have acquired an actual example that is missing the tip piece. Shoulder length is 0.75",
|
|
exposed length without the tip is 7.925", and shoulder diam on the ribbed shoulder is 33.70mm
|
|
when avoiding the ribs, and 33.9 mm across the ribs. Mass is 23.0 gm without the tip. The missing
|
|
tip is well under 1 gram so I'm putting the total mass at 23.5 gm based on this measurement. Wall
|
|
thickness samples run from 1.25 to 1.40 mm so adopting 1.3 mm here. -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC35Nike, Q20201</PartNumber>
|
|
<Description>Nose cone, plastic, 35mm, white, Nike Smoke, 8.0", PN PNC35Nike/Q20201</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">23.5</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<OutsideDiameter Unit="mm">35.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">33.7</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.75</ShoulderLength>
|
|
<Length Unit="in">8.0</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC35Egg / Q20224 is a black blowmolded cut-apart egg capsule. 2018 site says max diam is 1.9"
|
|
with length 5.0". Shoulder length in the 2018 photo is about 1". No data on the mass but
|
|
I'm estimating it around 25 gm. From the shape it would be more accurately modeled as
|
|
a ~3.5" ogive nose with a 1.5" conical rear transition. For here I'm just making an ogive
|
|
with the right mass...drag will be somewhat off. -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC35Egg, Q20224</PartNumber>
|
|
<Description>Nose cone, plastic, 35mm, black, egg capsule, 5.0", PN PNC35Egg/Q20224</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">25.0</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">35.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">33.9</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">1.0</ShoulderLength>
|
|
<Length Unit="in">5.0</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC40 is a 2.5" white one piece blowmoded ellipsoid. OR file has
|
|
mass 11.3 gm, shoulder len 0.75" -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC40, Q20400</PartNumber>
|
|
<Description>Nose cone, plastic, 40mm, white, ellipsoid, 2.5", PN PNC40/Q20400</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">11.3</Mass>
|
|
<Shape>ELLIPSOID</Shape>
|
|
<OutsideDiameter Unit="mm">40.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">38.8</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">0.75</ShoulderLength>
|
|
<Length Unit="in">2.5</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- PNC50 is a 6.0" white blowmold. OR file had mass 42.5 gm, shoulder len 2.25". Data on 2018 site
|
|
actually states that the shoulder is 2.5" long. -->
|
|
<NoseCone>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>PNC50, Q20250</PartNumber>
|
|
<Description>Nose cone, plastic, 50mm, white, ogive, 6.0", PN PNC50/Q20250</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">42.5</Mass>
|
|
<Shape>OGIVE</Shape>
|
|
<OutsideDiameter Unit="mm">50.0</OutsideDiameter>
|
|
<ShoulderDiameter Unit="mm">48.7</ShoulderDiameter>
|
|
<ShoulderLength Unit="in">2.5</ShoulderLength>
|
|
<Length Unit="in">6.0</Length>
|
|
<Thickness Unit="mm">1.3</Thickness>
|
|
</NoseCone>
|
|
|
|
<!-- =========== -->
|
|
<!-- Transitions -->
|
|
<!-- =========== -->
|
|
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>2520, Q21057</PartNumber>
|
|
<Description>Transition, plastic, 20mm to 25mm, black, increasing, 0.5" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">5.7</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">20.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">19.0</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.75</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">25.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">23.9</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.75</AftShoulderLength>
|
|
<Length Unit="in">0.5</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>2520 [R], Q21057 [R]</PartNumber>
|
|
<Description>Transition, plastic, 25mm to 20mm, black, decreasing, 0.5" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">5.7</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">25.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">23.9</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.75</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">20.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">19.0</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.75</AftShoulderLength>
|
|
<Length Unit="in">0.5</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
<!-- 25-30mm transition 21061 weighs 7.7 gm. Exposed length is 0.55", and houlder max diameters
|
|
are 23.34 mm and 28.75 mm, measured on a new sample obtained direct from Quest in late 2018.
|
|
The part is blow-molded in black, and the small shoulder is measurably
|
|
out of round; the minimum diameter is about 23.12 mm. Both ends of this transition are
|
|
closed and have molded-in loops for shock line attachment. The functional cylindrical
|
|
part of the smaller shoulder is 0.75" and 0.70" for the larger. There is a deep groove
|
|
on each end that allows the smaller section of the shoulder with the molded loop to
|
|
be optionally cut off. -->
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3025 [R], Q21061 [R]</PartNumber>
|
|
<Description>Transition, plastic, 30mm to 25mm, black, decreasing, 0.5" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">7.7</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">30.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">28.75</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.79</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">25.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">23.34</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.75</AftShoulderLength>
|
|
<Length Unit="in">0.55</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3025, Q21061</PartNumber>
|
|
<Description>Transition, plastic, 25mm to 30mm, black, increasing, 0.5" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">7.7</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">25.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">23.34</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.75</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">30.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">28.75</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.70</AftShoulderLength>
|
|
<Length Unit="in">0.55</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
<!-- Mass from OR file is probably wrong, identical to spec for 3025 transition. 2018 site says 35mm end
|
|
shoulder is 0.50", on 25mm end shoulder is 0.375" -->
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3525 [R], Q21052 [R]</PartNumber>
|
|
<Description>Tranasition, plastic, 35mm to 25mm, white, decreasing, 0.75" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">7.1</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">35.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">33.9</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.50</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">25.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">23.9</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.375</AftShoulderLength>
|
|
<Length Unit="in">0.75</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3525, Q21052</PartNumber>
|
|
<Description>Transition, plastic, 25mm to 35mm, white, increasing, 0.75" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">7.1</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">25.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">23.9</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.375</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">35.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">33.9</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.50</AftShoulderLength>
|
|
<Length Unit="in">0.75</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
<!-- NOTE - there are two 35/30 reducers listed on both the 2009 and 2018 sites. They are not the
|
|
same. Nominally, Q21056 has .75" exposed length and .5 and .375 shoulders, while Q21071 has
|
|
0.5" exposed length and 0.75" shoulders on both ends.
|
|
|
|
There is some contradictory data about colors of some parts. Close inspection of the Quest
|
|
website as of Jan 2019 shows that various photos of the transitions are wrong. For example,
|
|
the picture for the 21052 35/25 mm reducer is clearly of the 21056 35/30mm part. Likewise,
|
|
the photo for the 21056 35/30mm reducer has obviously wrong proportions and is too small on
|
|
the background grid; it looks like another photo of the 25/20 mm part.
|
|
|
|
The website description and photo for 21056 indicate black color, but the photo is obviously
|
|
of the wrong part - the exposed length and shoulder proportions are toally wrong. A newly
|
|
purchased part in late 2018 is white, as is another example from a Striker AGM kit.
|
|
On a 2018 invoice for a purchased part, the Q21056 description is just "35mm/30mm Reducer",
|
|
while for Q21071 it's "35mm/30mm Reducer Black". I also have a 21071 purchased at the same
|
|
time, and it's a black blow-molded part.
|
|
|
|
Given these data errors, I'm treating the website specs as less than authoritative.
|
|
-->
|
|
|
|
<!-- 35/30 transition Q21056 per 2018 website is nominally 0.75" long, shoulders 0.50" on 35mm end
|
|
and 0.375" on 30mm end. This is an injection molded part and has longitudinal ridges along the
|
|
exposed length, as well as four deeper valleys at 90 degree intervals. Internally there are 8
|
|
good-sized ribs around the inside of the 35 mm end that extend forward for about 2/3 of the
|
|
overall length.
|
|
|
|
On both my 21056 examples, the T35 shoulder diam is 33.66mm and the T30 shoulder diam is 28.66 mm.
|
|
Shoulder lengths are 0.346" for the 30mm end and 0.480" for the 35mm end; exposed length
|
|
is 0.75". Masses are 6.3 and 6.4 gm. Thickness of the shoulders averages about 0.040" on the
|
|
30 mm end and 0.057" on the 35 mm end.
|
|
|
|
The max diam of the ribbed section is 1.343" = 34.13 mm at the 35mm end, and the diam at the 30mm end
|
|
is 1.168" = 29.66 mm. This matches the impression of an obvious under-sized match to the T35 tube.
|
|
|
|
Actual values from measured samples are used here. As for color, given the website photo
|
|
errors discussed above, I am only listing this as white until proven otherwise.
|
|
-->
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3530 [R], Q21056 [R]</PartNumber>
|
|
<Description>Transition, plastic, 35mm to 30mm, white, decreasing, 0.75" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">6.4</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">35.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">33.66</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.48</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">30.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">28.66</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.346</AftShoulderLength>
|
|
<Length Unit="in">0.75</Length>
|
|
<Thickness Unit="in">0.050</Thickness>
|
|
</Transition>
|
|
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3530, Q21056</PartNumber>
|
|
<Description>Transition, plastic, 30mm to 35mm, white, increasing, 0.75" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">6.4</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">30.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">28.66</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.346</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">35.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">33.66</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.48</AftShoulderLength>
|
|
<Length Unit="in">0.75</Length>
|
|
<Thickness Unit="in">0.050</Thickness>
|
|
</Transition>
|
|
|
|
<!-- 35/30 short transition per 2009 website (maps to modern PN Q21071) is nominally 0.50" long,
|
|
with shoulders 0.75" on both ends. I have an actual 21071, purchased late 2018. It is
|
|
black blow-molded plastic, with the molded-loop sections on each end and grooves to facilitate
|
|
cutting them off.
|
|
|
|
Actual mass: 10.9 gm (without cutting off the ends) Measured dimensions: 30mm shoulder end
|
|
diam 28.16 to 28.60 mm, 35mm shoulder diam 33.18 to 33.80 mm, cylindrical shoulder lengths
|
|
0.772" on 30mm end, 0.697" on 35mm end. Exposed length 0.53". There's no way to measure
|
|
the thickness of the molding without cutting off an end. -->
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3530_short [R], Q21071 [R]</PartNumber>
|
|
<Description>Transition, plastic, 35mm to 30mm, black, decreasing, 0.5" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">10.9</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">35.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">33.8</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.70</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">30.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">28.6</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.77</AftShoulderLength>
|
|
<Length Unit="in">0.53</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
<Transition>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>3530_short, Q21071</PartNumber>
|
|
<Description>Transition, plastic, 30mm to 35mm, black, increasing, 0.5" length</Description>
|
|
<Material Type="BULK">Polystyrene, bulk</Material>
|
|
<Mass Unit="g">10.9</Mass>
|
|
<Shape>CONICAL</Shape>
|
|
<ForeOutsideDiameter Unit="mm">30.0</ForeOutsideDiameter>
|
|
<ForeShoulderDiameter Unit="mm">28.6</ForeShoulderDiameter>
|
|
<ForeShoulderLength Unit="in">0.77</ForeShoulderLength>
|
|
<AftOutsideDiameter Unit="mm">35.0</AftOutsideDiameter>
|
|
<AftShoulderDiameter Unit="mm">33.8</AftShoulderDiameter>
|
|
<AftShoulderLength Unit="in">0.70</AftShoulderLength>
|
|
<Length Unit="in">0.53</Length>
|
|
<Thickness Unit="mm">1.0</Thickness>
|
|
</Transition>
|
|
|
|
|
|
<!-- ======================== -->
|
|
<!-- Parachutes and Streamers -->
|
|
<!-- ======================== -->
|
|
|
|
<!-- PN 7810 14" parachute - acquired a sample of this. Thickness including printing is 1.1 mil -->
|
|
<Parachute>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>7810</PartNumber>
|
|
<Description>Parachute, plastic, 1.0 mil, 14" diam</Description>
|
|
<Material Type="SURFACE">Polyethylene film, HDPE, 1.0 mil, bare</Material>
|
|
<Diameter Unit="in">14.0</Diameter>
|
|
<Sides>6</Sides>
|
|
<LineCount>6</LineCount>
|
|
<LineLength Unit="in">13.0</LineLength>
|
|
<LineMaterial Type="LINE">Carpet Thread</LineMaterial>
|
|
</Parachute>
|
|
<Streamer>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>7811</PartNumber>
|
|
<Description>Streamer, plastic, 2.0 mil, 3 x 36"</Description>
|
|
<Material Type="SURFACE">Polyethylene film, HDPE, 2.0 mil, bare</Material>
|
|
<Length Unit="in">36.0</Length>
|
|
<Width Unit="in">3.0</Width>
|
|
<Thickness Unit="in">0.002</Thickness>
|
|
</Streamer>
|
|
|
|
<!-- =========== -->
|
|
<!-- Launch Lugs -->
|
|
<!-- =========== -->
|
|
|
|
<LaunchLug>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10000</PartNumber>
|
|
<Description>Launch lug, paper, 1/8 x 1.0 in</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.156</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.173</OutsideDiameter>
|
|
<Length Unit="in">1.0</Length>
|
|
</LaunchLug>
|
|
|
|
<LaunchLug>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10001</PartNumber>
|
|
<Description>Launch lug, paper, 1/8 x 2.0 in</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.156</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.173</OutsideDiameter>
|
|
<Length Unit="in">2.0</Length>
|
|
</LaunchLug>
|
|
|
|
<LaunchLug>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10009</PartNumber>
|
|
<Description>Launch lug, paper, 1/8 x 2.75 in</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.156</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.173</OutsideDiameter>
|
|
<Length Unit="in">2.75</Length>
|
|
</LaunchLug>
|
|
|
|
<LaunchLug>
|
|
<Manufacturer>Quest</Manufacturer>
|
|
<PartNumber>Q10008</PartNumber>
|
|
<Description>Launch lug, paper, 1/8 x 3.0 in</Description>
|
|
<Material Type="BULK">Paper, spiral kraft glassine, Estes avg, bulk</Material>
|
|
<InsideDiameter Unit="in">0.156</InsideDiameter>
|
|
<OutsideDiameter Unit="in">0.173</OutsideDiameter>
|
|
<Length Unit="in">3.0</Length>
|
|
</LaunchLug>
|
|
|
|
</Components>
|
|
</OpenRocketComponent>
|