openrocket/ChangeLog

2015-03-28 Kevin Ruland

  * Released version 15.03  See Release Notes for changes.

2014-11-02 Kevin Ruland

  * Released version 14.11  See Release Notes for changes.

2014-06-26 Kevin Ruland

  * Released version 14.06  See Release Notes for changes.

2014-05-21 Kevin Ruland

  * Released version 14.05  See Release Notes for changes.

2013-11-07 Kevin Ruland

  * Released version 13.11

2013-10-05 Kevin Ruland

  * Released version 13.09.1

2013-09-08 Sampo Niskanen

  * Released version 13.09

2013-08-18 Bill Kuker

  * Upgraded JOGL to version 2.0.2

2013-05-04 Sampo Niskanen

  * Released version 13.05

2013-04-17 Bill Kuker and Kevin Ruland

  * Added support for decals on rockets.  Added two new 3d views - 3d finished and 3d unfinshed.  Added support to export and
    apply decals (images) to rocket components.  Added ability to launch external graphics editor to edit decals and monitor
    file for writes to update the rocket view.

2013-04-17 Kevin Ruland

  * Added simulation of tumble recovery based on experimentation done by Sampo Niskane.  This is particularly useful
    for low power staged flights.

2013-04-17 Kevin Ruland

  * Extended "motor configuration" concept to cover more properties.  The concept was renamed "Flight Configuration" and
    allows the user to override stage separation, recovery deployment, and motor ignition per flight configuration.
    These configurations are stored in the ork file with each component.  If no override is specified then the user specified
    default is used (set in the component edit dialog).  The flight configuration dialog was reworked to make it more
    usable.  The user selects the configuration in a drop down with buttons for "add", "delete" and "rename".  After selecting
    the configuration, the tabbed area below allows the user to change the configuration for this simulation.

2013-04-17 Kevin Ruland

  * Allow simulation of stages without a motor.  Users in the past have attempted to simulate separate recovery of payload
    and booster by tricking OpenRocket using a dummy motor with trivial thrust curve.  Now the user does not need to do this.
    There is an example of this provided in TARC Payloader.ork and Boosted Dart.ork

2013-04-17 Kevin Ruland

  * Simulate recovery of boosters.  The simulation engine will create new FlightDataBranches for each stage after
    separation.  The data for the boosters begins at t=separation.  The simulation plot allows the user to select
    which stage's data to show (or all).

2013-04-17 Kevin Ruland

  * Modified the zoom and pan controls in the simulation plot.  Added zoom in, out, and reset buttons.  Added
    scroll with mouse wheel.  If the alt key is used with either of these, only the domain is zoomed.  Richard
    contributed a more logical mouse controlled zoom - right click and drag will zoom (either domain, range or both).

2012-09-28 Sampo Niskane

  * Released version 12.09.1

2012-09-25 Doug Pedrick

  * Added preference to open last edited design file upon startup.

  * [BUG] Fixed printing of transitions bug where the transition is deeply parented.

  * Cleaned up Swing listeners of Configuration (memory leak).

2012-09-16 Sampo Niskanen

  * Released version 12.09

2012-08-28 Bill Kuker

   * Removed late GL initialization, was causing issues with Java 7.

   * Added -Dopenrocket.3d.disable option for anyone experiencing crashes as a result of OpenGL.

2012-08-01 Kevin Ruland

   * Changed the loader to pull *.rkt files from zip containers.

   * Modified the BasicFrame so it doesn't automatically open the Rocket configuration dialog when opening a new rocket.

   * Unified the behavior for replacing (automatically closing) the base frame when opening a file, loading an example,
   or picking from the Most-recently-used list.

2012-06-24  Bill Kuker

  * OSX UI Elements: Screen menu bar, Application name, Dock Icon, Quit, About & Preference
    handlers. Stubs for the "Apple Java Extensions" to allow other platforms to compile provided
    by https://github.com/ymasory/OrangeExtensions.

2012-06-11  Bill Kuker

  * Added a 3D view of the rocket to the figure panel.

2012-06-05  Doug Pedrick

  * Most recently used design files added to File menu.

2012-05-23  Doug Pedrick

  * Centering ring templates can now be chosen for printing.
  * Calibration ruler added to printed templates.

2012-05-09  Kevin Ruland

  * Add ComponentPreset functionality.  These are commercial components which can be used in rocket designs.
    System currently support Body Tube, Nose Cone, Transition, Tube Coupler, Centering Ring, Engine Block, Bulk Head,
    Launch Lug, Streamer and Parachutes.  Received permission from Always Ready Rocketry, Balsa Machining Service, Giant
    Leap Rocketry, Public Missiles, Semroc and Fliskits to include their parts catalogs in OR.

2012-05-09  Kevin Ruland

  * Add fractional inch unit 'in/64' to Length unit group.

2012-05-09  Jason Blood

  * Add PageFitPrintStrategy and related files to print multiple fins, transitions, and nosecones onto the same page(s)

2012-04-19  Sampo Niskanen

  * Allow opening recovery device on stage separation

2012-04-11  Doug Pedrick

  * [BUG] Printed simulation did not honor launch conditions

2012-04-09  Sampo Niskanen

  * [BUG] Cancelling simulation causes later simulations to fail
  * Add debugging for NPE in GeneralOptimizationDialog

2012-03-27  Sampo Niskanen

  * [BUG] Inputting negative rotation angle values of components

2012-03-25  Sampo Niskanen

  * [BUG] Removed locale-specific toLowerCase/toUpperCase

2012-03-25  Doug Pedrick

  * Printed rocket figure in design report now honors rotation angle of main figure; fixed bug in layout where the
    figure was clipped in the page margin.

2012-03-18  Jason Blood

  * Updated importing images to freeform fin sets to work with color images with improved description

2012-03-17  Sampo Niskanen

  * Released version 12.03

2012-03-14  Jason Blood

  * Importing images to freeform fin sets

2012-03-13  Sampo Niskanne

  * [BUG] Threads piled up when running simulations

2012-03-11  Sampo Niskanen

  * Update copyright statements

2012-02-19  Sampo Niskanen

  * Display computed motor class

2012-02-16  Sampo Niskanen

  * [BUG] Freeze when dropping component on child component

2012-02-10  Sampo Niskanen

  * Configurable stage separation events

2012-00-00  Doug Pedrick

  * RKT saving support

2011-11-24  Sampo Niskanen

  * Released version 1.1.9

2011-11-18  Doug Pedrick

  * Printable Fin Marking Guides, Transitions, and Nose Cones

2011-10-20  Sampo Niskanen

  * [BUG] NPE if plot data type is not present

2011-10-11  Sampo Niskanen

  * [BUG] Translators fetched before initialization

2011-10-05  Doug Pedrick

  * Fin tab autocalculation

2011-09-26  Sampo Niskanen

  * [BUG] Thrust was computed from dropped stages

2011-09-18  Sampo Niskanen

  * Remember window/dialog sizes and/or positions

2011-09-13  Sampo Niskanen

  * Added icons to help menu

2011-08-28  Richard Graham

  * Patch for geodetic computations + coriolis effect
  * Patch for enhanced gravity model

2011-08-25  Sampo Niskanen

  * Released version 1.1.8
  * [BUG] Ignore synthetic methods in logging traces
  * [BUG] Ignore JRE bug #6826104

2011-08-24  Sampo Niskanen

  * [BUG] NPE in SimulationOptions.equals
  * [BUG] Exception in plotting optimization path
  * [BUG] Exception in saving optimization path

2011-08-17  Justin Seitz

  * Added Blue tube to materials database.

2011-08-13  Sampo Niskanen

  * [BUG] JDK7 returns null font for TitledBorder

2011-08-12  Sampo Niskanen

  * Released version 1.1.7

2011-08-08  Sampo Niskanen

  * Enhanced one-dimensional optimization algorithm
  * [BUG] l10n/ directory not included in source distribution

2011-08-07  Sampo Niskanen

  * Optimization implementation

2011-07-29  Sampo Niskanen

  * [BUG] NaN in transition radius calculation

2011-07-22  Sampo Niskanen

  * Released version 1.1.6.

2011-07-21  Sampo Niskanen

  * [BUG] Converting triangular fin to freeform
  * [BUG] Unit conversions in printout
  * [BUG] Mass computations in printout
  * [BUG] "Not a drop" exception in ComponentTreeTransferHandler
  * [BUG] Plot annotation positioned wrong
  * [BUG] Exception when writing PDF failed
  * Language selector in preferences

2011-07-18  Sampo Niskanen

  * Select motor type based on known manufacturers
  * Updated motor thrust curves from thrustcurve.org

2011-07-17  Sampo Niskanen

  * Component scaling support

2011-07-14  Sampo Niskanen

  * [BUG] Body tube auto-radius not enabled
  * Optimization implementation

2011-06-26  Sampo Niskanen

  * [BUG] Original rocket was modified when sim.listener modified rocket

2011-06-18  Sampo Niskanen

  * Merged l10n branch into trunk, initial l10n support

2011-06-10  Sampo Niskanen

  * Released version 1.1.5

2011-05-16  Sampo Niskanen

  * Updated about dialog

2011-04-15  Sampo Niskanen

  * Removed native printing support

2011-03-05  Sampo Niskanen

  * Released version 1.1.4

2011-01-20  Sampo Niskanen

  * Initial i18n support

2011-01-18  Sampo Niskanen

  * [BUG] Simulation warnings were not being stored
  * [BUG] Exclamation mark did not fit in simulation table
  * Added instructions for zooming in plot dialog

2010-12-01  Doug Pedrick

  * Merging printing support

2010-10-30  Sampo Niskanen

  * [BUG] Invalid refereces to components used in caches

2010-10-25  Doug Pedrick

  * [BUG] Take launch lug radial angle into account when loading rkt file

2010-10-24  Sampo Niskanen

  * Added SafetyMutex and took into use in Simulation

2010-10-18  Sampo Niskanen

  * Ignore Sun JRE bug in D3D

2010-10-09  Sampo Niskanen

  * [BUG] Fixed conversion to freeform fin set
  * Enhanced logging

2010-10-08  Sampo Niskanen

  * New components no longer look expandable in the component tree

2010-10-06  Sampo Niskanen

  * Released version 1.1.3

2010-10-05  Sampo Niskanen

  * Display comment as tooltip in component tree
  * Limited allowed component attachments to those of the component add buttons

2010-10-03  Sampo Niskanen

  * Added VBOSE logging level

2010-10-02  Sampo Niskanen

  * [BUG] Exception when undoing changes

2010-09-27  Sampo Niskanen

  * Implemented DnD for component tree
  * Documented undo/redo functionality

2010-09-07  Sampo Niskanen

  * Released version 1.1.2

2010-09-05  Sampo Niskanen

  * [BUG] Fixed bug that prevents adding stages to a rocket

2010-09-04  Sampo Niskanen

  * Added launch rod velocity to FlightData
  * [BUG] Total velocity was measured from airspeed

2010-09-03  Sampo Niskanen

  * Released version 1.1.1

2010-09-01  Sampo Niskanen

  * [BUG] Fixed rocket config dialog being too large

2010-08-31  Sampo Niskanen

  * Updated all thrust curves from thrustcurve.org

2010-08-30  Sampo Niskanen

  * Implemented user-defined thrust curve loading

2010-07-30  Sampo Niskanen

  * [BUG] Fixed motor statistic computation
  * Finalized enhanced motor selection dialog

2010-07-22  Doug Pedrick

  * [BUG] Fixed RockSim fin loading

2010-07-21  Sampo Niskanen

  * Implemented enhanced motor selection dialog
  * Background motor loading & startup time optimization

2010-07-20  Doug Pedrick

  * [BUG] Exception when loading Rocksim files

2010-07-19  Sampo Niskanen

  * [BUG] Various small bug fixes

2010-07-18  Sampo Niskanen

  * Major refactoring of simulation code

2010-03-21  Sampo Niskanen

  * Released version 1.1.0

2010-03-20  Doug Pedrick

  * [BUG] Fixed RockSim design material loading

2010-03-20  Sampo Niskanen

  * Minor enhancements to the logging system
  * Updated unit tests of Rocksim file loading

2010-03-13  Doug Pedrick / Sampo Niskanen

  * Initial RockSim design loading support

2010-03-10  Sampo Niskanen

  * Released version 1.0.0
  * [BUG] Removing point of freeform fin could create intersecting shape

2010-03-09  Sampo Niskanen

  * Updated thrustcurves with newest curves from thrustcurve.org
  * Updated splash screen

2010-03-05  Sampo Niskanen

  * [BUG] Fixed exception for fins with small root chord

2010-02-26  Sampo Niskanen

  * Simulation panel max.acceleration now from flight stage only

2010-02-17  Sampo Niskanen

  * Released version 0.9.6

2010-01-11  Sampo Niskanen

  * Detect out of memory condition even if masked by another exception
  * Updated copyright year

2009-12-31  Sampo Niskanen

  * [BUG] Exception when removing component listeners
  * [BUG] OutOfMemoryError was masked when saving file

2009-12-30  Sampo Niskanen

  * [BUG] "Reset" button did nothing for simulation time step

2009-12-29  Sampo Niskanen

  * Update fin calculation methods for 1 and 2 fin sets
  * Rotate rocket to worst roll angle before simulations

2009-12-23  Sampo Niskanen

  * Updated time step selection methods

2009-12-16  Sampo Niskanen

  * [BUG] Fixed NullPointerException in ComponentConfigDialog

2009-12-15  Sampo Niskanen

  * [BUG] Illegal mapping in SimulationRunDialog
  * [BUG] Fixed assertions in Quaternion class

2009-12-14  Sampo Niskanen

  * Implemented central logging system (not taken into use yet)

2009-12-05  Sampo Niskanen

  * [BUG] Fixed assertions in Quaternion class

2009-12-03  Sampo Niskanen

  * [BUG] Fixed fin computation of two-fin set

2009-12-02  Sampo Niskanen

  * Take into account all fins in fin-fin interference
  * Removed 15%/6% fin dependence on lateral wind direction

2009-11-28  Sampo Niskanen

  * Released version 0.9.5
  * [BUG] NPE when clearing combo box selections
  * Minor fixes to update checking
  * Added a few guidance texts

2009-11-27  Sampo Niskanen

  * [BUG] Fixed computing inner radius of centering ring
  * Removed RuntimeException instantiation from all classes

2009-11-24  Sampo Niskanen

  * Released version 0.9.4

2009-11-24  Sampo Niskanen

  * Close original window when opening example design

2009-11-10  Sampo Niskanen

  * [BUG] Fixed transition volume/mass computation
  * [BUG] Simulations etc. using removed motor configuration IDs

2009-10-11  Sampo Niskanen

  * [BUG] Sorting motor selection dialog with ',' decimal separator

2009-10-10  Sampo Niskanen

  * Removed non-ASCII characters from source code files
  * Created Chars class for non-ASCII characters
  * Added styrofoam materials

2009-10-04  Sampo Niskanen

  * [BUG] Fixed too high configuration dialogs

2009-10-03  Sampo Niskanen

  * Added debug information to ant build file compilation
  * Implemented update information fetching (client side)

2009-09-26  Sampo Niskanen

  * Implemented custom material editing

2009-09-20  Sampo Niskanen

  * Implemented more unit tests, fixed bugs

2009-09-19  Sampo Niskanen

  * [BUG] Ignore Sun JRE bug 6828938 in ExceptionHandler
  * Implemented non-exception throwing bug handling
  * [BUG] Fixed unnecessary cropping for component tree names

2009-09-10  Sampo Niskanen

  * [BUG] Freeform fin set shape undo not working
  * [BUG] Conversion to freeform fin set not working

2009-09-08  Sampo Niskanen

  * Allow components to be attached to tube coupler

2009-09-07  Sampo Niskanen

  * Implemented fin tab save/load

2009-09-04  Sampo Niskanen

  * Implemented through-the-wall fin tabs (excluding save/load)

2009-09-01  Sampo Niskanen

  * Released version 0.9.3

2009-08-29  Sampo Niskanen

  * Extracted motor manufacturer into separate class
  * Started writing unit tests

2009-08-28  Sampo Niskanen

  * Added icon and source info to About dialog
  * Finalized flight event plot icons

2009-08-27  Sampo Niskanen

  * Allow clicking on label to toggle checkbox in two tables

2009-08-21  Sampo Niskanen

  * Showing events in non-time-domain-plots

2009-08-20  Sampo Niskanen

  * Showing events in time-domain plots

2009-08-15  Sampo Niskanen

  * Possibility to save user-defined materials

2009-08-14  Sampo Niskanen

  * Plots ignore trailing NaN values

2009-08-13  Sampo Niskanen

  * [BUG] Added fin cant for elliptical fins

2009-08-12  Sampo Niskanen

  * Warning dialog when loading files
  * [BUG] Unnecessary warnings when loading files

2009-08-09  Sampo Niskanen

  * [BUG] Fixed various bugs in motor loading (e.g. mass calculation,
    more rigorous input checking etc)

2009-08-08  Sampo Niskanen

  * Refactored motor loading and "Simple XML" loading classes
  * Implemented RockSim motor definition file loading

2009-08-07  Sampo Niskanen

  * Created window icons and took into use
  * Changed motor burn time and avg. thrust calculations to be
    NFPA 1125 compliant

2009-08-03  Sampo Niskanen

  * Automatic bug reporting when uncaught exceptions occur

2009-07-29  Sampo Niskanen

  * Clustered inner tube splitting
  * [BUG] Copy-pasted inner tubes shared motors

2009-07-28  Sampo Niskanen

  * Opening of example rocket designs

2009-07-27  Sampo Niskanen

  * [BUG] Launch lug radial position not correctly loaded

2009-07-26  Sampo Niskanen

  * [BUG] Fixed unit name of ft/s^2
  * Implemented flight data exporting
  * [BUG] Fixed "unknown error" when opening file of zero size
  * [BUG] Fixed exception in motor configuration name editing

2009-07-13  Sampo Niskanen

  * Released version 0.9.2

2009-07-12  Sampo Niskanen

  * [BUG] Better DescriptionArea based on JEditorPane

2009-07-09  Sampo Niskanen

  * [BUG] Fixed imperial unit conversions
  * [BUG] Fixed engine block icon transparency

2009-06-26  Sampo Niskanen

  * Progress dialogs for file open/save
  * File size estimate in save dialog

2009-06-20  Sampo Niskanen

  * New edit motor configurations dialog
  * Changed FreeformFinSet to throw checked exceptions

2009-06-11  Sampo Niskanen

  * Added search field to motor chooser dialog

2009-06-09  Sampo Niskanen

  * Released version 0.9.1

2009-06-08  Sampo Niskanen

  * Fixed loading of icons from JAR

2009-06-06  Sampo Niskanen

  * Cut/Copy/Paste of simulations
  * Improved build scripts

2009-05-28  Sampo Niskanen

  * Added startup check for Java 1.6 and OpenJDK

2009-05-28  Sampo Niskanen

  * Fixed FixedPrecisionUnit formatting
  * Fixed saving of transitions
  * Fixed file dialog directory browsing
  * Initial shift-click selects second component from figure
  * Allow adding body components without selecting stage

2009-05-24  Sampo Niskanen  <sampo.niskanen@iki.fi>

  * Initial release 0.9.0